FIXOBOND PC 80A FW

SR Adhesive

Specifications

Base
Synthetic Rubber
Application
This adhesive primarily designed for footwear assembling. It can be used for bonding EVA to leather, Microsole to Leather and many other common footwear substrates. This adhesive is operated with in tack time 10min to 60min depending upon different substrates.
Solvent
This is composed of aliphatic and aromatic solvent combination. 
Viscosity
1700 - 2000 cps at 30 ± 2ºC.

Method of Application

Make sure that the surfaces to be bonded are even, clean, dry and free from grease/oil. A coat of adhesive is to be applied uniformly on both the surfaces to be joined. Porous substrates like leather may require tow coats for superiors bonding. Wait for 8 – 10 minutes to allow the solvent to evaporate. Place the coated surfaces one above the other while the adhesive remains sticky. Press the surfaces firmly together. Final strength is to be achieved after 24 hrs.

Caution

It is highly inflammable. Replace lid immediately after partial use. Store in a cool and dry place.

Pack Sizes

25 Lts / 5 Lts / 1 Lt.

 

  • Footwear Assembling

  • EVA Sole To Leather Bonding

  • Footwear Assembling

  • Mcrosole To Leather Joinining