Dendrite Wood Shine

Specifications

Physical Appearance
Dark Brown Clear Solution
Odour
Non-pungent
Surface Drying Time
10 -15 minutes
Tack Free Time
90 -120 minutes
Hard Dry
24 hrs. minimum
Gloss
70-90% at 60˚C

Method of Application

For Pre-Polished Surfaces:
Carefully examine the pre-polished surface. Look closely for any scratches left by coarse grit sandpaper. Once the wood is blemish free, remove the dust. Finally, to be completely sure the surface is free of dust and grease wipe it with a tack cloth. Apply of coat of Dendrite Wood Shine either with brush, muslin cloth or spray gun. Allow the surface to dry for minimum 6-8 hours and then sand with emery paper no. 320. Apply second coat of Dendrite Wood Shine for better result.
For New Surfaces:
After base preparation using filler and sealer then follow the procedure for pre-polished surfaces.

Caution

Stir well before use and strain through muslin cloth. To get desired consistency dilute with Mineral Turpentine. Ideal for interior use. Use in well ventilated area. Highly inflammable-keep away from naked flame and heat

Pack Sizes

200ml, 500ml, 1Lit