DENDRITE URGENTA

Specifications

Base
Synthetic Rubber
Application
This is a high heat resistant, low tack, having good initial gripping, synthetic rubber based adhesive. This adhesive is designed for furniture, upholstery & footwear industries. This is used for fixing laminates with wood, Particle boards, veneer, foam, fabric, leather cloth etc.
Solvent
This is composed of aliphatic, aromatic & some other solvent combination.
Colour
Light yellow.
Viscosity
2500 – 2700 cps at 30º ± 2ºC.
Tack Retention
5 – 8 Minutes

Method of Application

Make sure that the surfaces to be bonded are even, clean, dry and free from grease/oil. A thin coat of adhesive is to be applied uniformly on both the surfaces to be joined. Porous substrates may require two coats for superior bonding. Allow 4 - 5 minutes for solvent evaporation. Place the coated surfaces, one above the other while the adhesive remains sticky. Press the surfaces firmly together under adequate pressure. Final strength is to be achieved after 24 hrs.

Caution

It is highly inflammable. Replace lid immediately after partial use.It should be stored in a cool and dry place. It is suggested to wear suitable protective clothing and safety goggles for protecting eyes while handling.

Pack Sizes

5 Lit, 1Lit, 500 mL.

Caution

Shake the container before use.