DENDRITE SR 1010

SR Adhesive

Specifications

Base
Synthetic Rubber
Application
This is designed for footwear assembling like sole attachment and heel assembling. It can be used specially for bonding VT buff leather, MDF sole etc. This material is operated with in the tack time of 10min to 30min, depending upon substrates.
Solvent
Aliphatic and Aromatic solvent Combination.
Viscosity
1900 - 2100 cps at 30 ± 2ºC.

Method of Application

Make sure that the surfaces to be bonded are even, clean, dry and free from grease/oil. A coat of adhesive is to be applied uniformly on both the surfaces to be joined. Porous substrates like leather may require tow coats for superiors bonding. Wait for 8 – 10 minutes to allow the solvent to evaporate. Place the coated surfaces one above the other while the adhesive remains sticky. Press the surfaces firmly together. Final strength is to be achieved after 24 hrs.

Caution

It is highly inflammable. Replace lid immediately after partial use. Store in a cool and dry place.

Pack Sizes

25 Lts / 5 Lts / 1 Lt/ 500 ML.

  • Sole Attachment

  • Heel Assembling

  • Sole Attachment

  • Footwear Assembling