DENDRITE SPECIAL

SR Adhesive

Specifications

Base
Poly Vinyl Acetate Homo-polymer based formulated White Adhesive.
Application
DENDRITE SPECIAL is specially formulated Multipurpose White Adhesive for use in Furniture, Packaging, Handicrafts and Allied Industries.
Solvent
De-Ionised Water
Appearance
Milky White
Viscosity
28000-34000 cps att 30ºC.

Method of Application

Make sure that the surface to be bonded are even, clean, dry and free from grease/oil.

A coat of the adhesive is to be applied uniformly on both the surfaces to be joined. The adhesive can be applied by brush, roller, applicator etc.

Bring both the adhesive coated surfaces in proper contact before the adhesive is dried. Pressure is to be applied from one side by using a piece of cloth to avoid bubbles entrapping.

Press the surface firmly together by using nails, clamps, weight, tape etc. Excess adhesive that oozes out from the edges may be wiped off with a moist cloth.

In case of highly porous substrates like particle board, MDF etc. for better bonding apply a thin coat of the adhesive on the surface and allow to dry. This will fill the pores on the surface. After drying, buff lightly with sand paper to get smooth uniform surface. Then the surface to be bonded as per the method stated above.

Caution

Tighten the containers after partially used. If any skin formation is observed, then remove the skin before further use. Container should be kept in a cool and shaded area.

Pack Sizes

50 kg, 20 kg, 10 kg, 5 kg, 1 kg & 500 gms.