Dendrite Yamapoxy Quick and Clear

Specifications

Base
:It is a two component Epoxy based adhesive. 
Component – I: Resin Part
Component – II: Hardener part
Appllication
: It can be used for bangle industries, marble setting, hardwear application, glass fixing, electronics application, automobile, jewellary, conch bangle repairing etc.
Apperence
: Resin part: Colourless clear viscous liquid
Hardener part: Colourless viscous liquid.
Viscosity
: Resin part: 9000 ± 1000cps at 30 ± 2°C
Hardener Part: 10000 ± 2000cps at 30 ± 2°C
Pot Life of 10g Mix:
: 4 – 5min at 30 ± 2°C
Mixing Ratio R:H =
1: 1 by weight 1: 1 by volume

Method of Application

Make sure that the surfaces to be bonded are clean, dry and free from grease/oil. Take equal volume from each component, as per the requirement and mix thoroughly both the components. After mixing, it may be applied within 2 to 3minutes (at 30°C). The setting time of the above mix is around 4 - 5min. However, final strength is achieved after 24 hrs.

Caution

Pack should be airtight after taking out the material from tube at all the time. Store in a cool & dry place. Keep away from direct heat and sunlight.

Pack Size

6 gm.

  • Electronic

  • Automobile

  • Jewellary

  • Bangle Industries