Dendrite Special Sprayable General

Specifications

Base
Synthetic Rubber
Application
Most suitable for any large area where brushing is neither possible nor economical; in industries like seat making, liner fixing, furniture and similar others.
Solvent
Aromatic and Aliphatic solvent combination. 
Colour
Light yellow. 
Viscosity
110-130 cps at 25º ± 5ºC.
 

Characteristics:

• Cover wide area
 
•  Optimum particle size distribution
 
• Less odour while spraying
 
• Fast drying solvent system with long tack retention

Method of Application

The surfaces should be clean, dry and free from grease and oil. The adhesive should be applied either by airless or air spray gun. Proper spray tip is to be used to have correct spray pattern. The general nozzle diameter is 1.5 mm with average pressure of 4-6 kg./sq.cm.

Caution

Spraying should be done in a well ventilated place. Highly inflammable. Replace lid immediately after partial use. Store in a cool and dry place. During use the applicator nozzle is to be kept away from human body. After use clean the spray gun nozzle with solvent to avoid chocking.

Pack Sizes

Container - 25 Ltr, 10 Ltr, 5 Ltr, 1 Ltr, 500 ml, 200 ml, 75 ml.

Special Instruction

Shake the container before use.

 

  • Foam Bonding

  • Liner Fixing

  • Furniture Manufacturing

  • Bus Decor