Call us on
91 - 98746 20044
Make sure that the surfaces to be bonded are clean, dry and free from grease/oil. Uniform coat of adhesive is to be applied on both the surfaces to be joined. Porous substrates like leather may require double coats for superior bonding. Allow 8 – 10 minutes for solvent evaporation. Place the coated surfaces one above the other while the adhesive remains sticky. Press the surfaces firmly together. Final strength is to be achieved after 24 hrs.
It is highly inflammable. Replace lid immediately after partial use. Container should be stored in a cool and dry place.
25lit.