|
|
|
FIXOBOND FW |
|
Base |
Synthetic Rubber |
 |
|
Application |
Leather |
|
Solvent |
Aromatic and Aliphatic Solvent Combination |
|
Colour |
Light Tan |
| Solid
Content |
Approximately
19% |
| Viscosity
|
1900
+/- 100 cps at 30 degree centigrade |
|
Method of Application |
Make sure that the surfaces to be bonded are clean, dry
and properly degreased. Smooth surfaces are to be buffed
or etched with sand paper and the loose particles are
removed. Apply an effective even coat of adhesive on both
the cleaned surfaces to be bonded, and allow the solvent
to evaporate in next 10-15 minutes. For better result,
double coat is recommended on porous substrates. Place
the coated surfaces then one over other beginning from
one end. Press firmly for a proper overall contact. Leave
at least for 24 hours to achieve final bond strength.
|
| Caution
|
Highly
inflammable. Replace lid immediately after partial use.
Store in a cool and dry place. |
| Packing
|
20
ltrs, 5 ltrs, 1 ltr, 500 ml |
|
