|
|
|
FIXOBOND PC-80A |
|
Base |
Synthetic Rubber |
 |
|
Application |
Leather, rubber, canvas, wood, flooring, automobile body
décor and similar others. |
|
Solvent |
Aromatic and Aliphatic Solvent Combination |
|
Colour |
Light Tan |
| Solid
Content |
Approximately
19% |
| Viscosity
|
1900
+/- 100 cps at 30 degree centigrade |
|
Method of Application |
Make sure that the surfaces to be bonded are clean, dry
and properly degreased. Smooth surfaces are to be buffed
or etched with sand paper and the loose particles are
removed. Apply an effective even coat of adhesive on both
the cleaned surfaces to be bonded, and allow the solvent
to evaporate in next 10-15 minutes. For better result,
double coat is recommended on porous substrates. Place
the coated surfaces then one over the other beginning
from one end. Press firmly for a proper overall contact.
Leave at least for 24 hours to achieve final bond strength.
|
| Caution
|
Highly
inflammable. Replace lid immediately after partial use.
Store in a cool and dry place. |
| Packing
|
20
ltrs, 5 ltrs, 1 ltr, 200 ml, 500 ml |
|
