|
|
| DENDRITE
EPOXY RAPID |
| Base |
Resin:
Epoxy
Hardener: Polyamide |
 |
| Appearance |
Resin:
Translucent
Hardener: Yellowish brown liquid |
| Viscosity |
Resin:
6000 - 8000 cps at 40°c.
Hardener: 5000 - 7000 cps at 40°c. |
| Characteristics |
Two
component epoxy adhesive used for joining metal, stone,
glass, ceramics, wood ete. where fast setting rigid joints
are required. |
| Pretreatment
of Surface |
The
surface to be bonded, should be free from dirt oil and
grease. The metal surface should be sand blasted or abraded.
Rubber can be dipped in concentrated sulphuric acid for
5 minutes followed by washing with water and subsequently
complete drying. |
| Method
of Application |
Mix
the two components i.e. epoxy resin and hardener in the
ratio 1: 1 (by volume) or 1 :0.8 (by weight). The mixed
adhesive can be applied on the surfaces by a spatula immediately
after mixing. After application of the adhesive the substrates
to be bonded, are to be positioned and clamped. Mixed
quantity to be used within next 10 minutes. Handling strength
will be achieved within 2 hours approx. |
| Caution |
Replace
lid immediately after partial use. Store in a cool and
dry place. Epoxy Resin mixed with Hardener has limited
pot life. To avoid wastage, mix only the amount required.
|
| Packing |
13
gms, 36 gms, 180 gms in tubes.
1.8 kg in containers.
|
|
