|
|
| DENDRITE
OR-8100 |
| Base
|
POLYURETHANE
ELASTOMER |
| Application
|
Footwear,
for bonding synthetic soles with upper. Can also be used
without hardener |
| Viscosity
|
2300-2600
cps at 30 degree Centigrade |
| Solvent
|
Aliphatic
and Aromatic solvents including Ketones |
| Method
of Application |
Both
the substrates to be bonded, are to be made free from
impurities including dust, oil, grease etc. and made dry.
The leather surface is to be buffed properly. The synthetic
surface is kept in the open atmosphere for minimum 5 minutes.
A thin layer of adhesive is to be applied on both the
surfaces to be bonded. Both surfaces are to be kept for
solvent evaporation for 10 minutes. Second coat on porous
surface will produce better result. The two substrates
are then bonded by "stuck on process" after
heat activation (at 70-75 degree centigrade for leather
and for PVC at 50 degree centigrade approx for TPR/EVA/PU.
Bonding is to be done immediately after heat activation
under uniform pressure when the substrates are hot. |
| Caution |
Highly inflammable. Replace lid immediately after partial
use. Store in a cool and dry place. |
| Packing
|
20
ltrs
|
|
