|
|
| DENDRITE
OR 3000 |
|
Base |
Polyurethane
Elastomer. |
 |
| Application |
Footwear
as a two component adhesive for synthetic soles in combination
with proportionate hardener, Yamadur R-22/H-20. |
| Solvent |
Aliphatic
and Aromatic solvents including Ketones. |
| Viscosity |
850-950
cps at 30° ± 5°C |
| Method
of Application |
It
is preferable to use the adhesive mixed with cross linking
agent like Yamadur H-20 in the ratio of 5% by volume in
order to attain better durability of bonded surfaces,
resistance to higher service temperature and wider bonding
range. The surfaces to be joined, are to be made free
from dust, oil and grease. A thin layer of hardener added
adhesive is to be applied on the surfaces to be bonded.
Track-free adhesive films on both substrates are to be
heat activated at around 70 degree Centigrade and then
pressed together with uniform pressure while hot. Final
peel strength will be achieved after 24 hours. |
| Caution |
Highly
inflammable. Replace lid immediately after partial use.
Store in a cool and dry place. Adhesive mixed with cross
linking agent has limited pot life. To avoid wastage,
mix only the amount required. |
| Packing |
20
Ltrs, 5 Ltrs
|
|
